segy.h 21.3 KB
Newer Older
Tilman Steinweg's avatar
Tilman Steinweg committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854
/* Copyright (c) Colorado School of Mines, 2011.*/
/* All rights reserved.                       */

/* This header file is part of the Seismic Unix (SU) package. 
 * For license information please see the file 
 * LEGAL_STATEMENT_segy_h.
 */

/* segy.h - include file for SEGY traces
 *
 * declarations for:
 *	typedef struct {} segy - the trace identification header
 *	typedef struct {} bhed - binary header
 *
 * Note:
 *	If header words are added, run the makefile in this directory
 *	to recreate hdr.h.
 *
 * Reference:
 *	K. M. Barry, D. A. Cavers and C. W. Kneale, "Special Report:
 *		Recommended Standards for Digital Tape Formats",
 *		Geophysics, vol. 40, no. 2 (April 1975), P. 344-352.
 *	
 */ 

#include <limits.h>

#ifndef SEGY_H
#define SEGY_H

#define SU_NFLTS     USHRT_MAX    /*   Arbitrary limit on data array size   */

/* #define SU_NFLTS	65535      Arbitrary limit on data array size	*/
/* #define SU_NFLTS	32767	 Arbitrary limit on data array size	*/


/* TYPEDEFS */
typedef struct {	/* segy - trace identification header */

	int tracl;	/* Trace sequence number within line
			   --numbers continue to increase if the
			   same line continues across multiple
			   SEG Y files.
			   byte# 1-4
			 */

	int tracr;	/* Trace sequence number within SEG Y file
			   ---each file starts with trace sequence
			   one
			   byte# 5-8
			 */

	int fldr;	/* Original field record number
			   byte# 9-12 
			*/

	int tracf;	/* Trace number within original field record 
			   byte# 13-16
			*/

	int ep;		/* energy source point number
			   ---Used when more than one record occurs
			   at the same effective surface location.
			   byte# 17-20
			 */

	int cdp;	/* Ensemble number (i.e. CDP, CMP, CRP,...) 
			   byte# 21-24
			*/

	int cdpt;	/* trace number within the ensemble
			   ---each ensemble starts with trace number one.
			   byte# 25-28
			 */

	short trid;	/* trace identification code:
			-1 = Other
		         0 = Unknown
			 1 = Seismic data
			 2 = Dead
			 3 = Dummy
			 4 = Time break
			 5 = Uphole
			 6 = Sweep
			 7 = Timing
			 8 = Water break
			 9 = Near-field gun signature
			10 = Far-field gun signature
			11 = Seismic pressure sensor
			12 = Multicomponent seismic sensor
				- Vertical component
			13 = Multicomponent seismic sensor
				- Cross-line component 
			14 = Multicomponent seismic sensor
				- in-line component 
			15 = Rotated multicomponent seismic sensor
				- Vertical component
			16 = Rotated multicomponent seismic sensor
				- Transverse component
			17 = Rotated multicomponent seismic sensor
				- Radial component
			18 = Vibrator reaction mass
			19 = Vibrator baseplate
			20 = Vibrator estimated ground force
			21 = Vibrator reference
			22 = Time-velocity pairs
			23 ... N = optional use 
				(maximum N = 32,767)

			Following are CWP id flags:

			109 = autocorrelation
			110 = Fourier transformed - no packing
			     xr[0],xi[0], ..., xr[N-1],xi[N-1]
			111 = Fourier transformed - unpacked Nyquist
			     xr[0],xi[0],...,xr[N/2],xi[N/2]
			112 = Fourier transformed - packed Nyquist
	 		     even N:
			     xr[0],xr[N/2],xr[1],xi[1], ...,
				xr[N/2 -1],xi[N/2 -1]
				(note the exceptional second entry)
			     odd N:
			     xr[0],xr[(N-1)/2],xr[1],xi[1], ...,
				xr[(N-1)/2 -1],xi[(N-1)/2 -1],xi[(N-1)/2]
				(note the exceptional second & last entries)
			113 = Complex signal in the time domain
			     xr[0],xi[0], ..., xr[N-1],xi[N-1]
			114 = Fourier transformed - amplitude/phase
			     a[0],p[0], ..., a[N-1],p[N-1]
			115 = Complex time signal - amplitude/phase
			     a[0],p[0], ..., a[N-1],p[N-1]
			116 = Real part of complex trace from 0 to Nyquist
			117 = Imag part of complex trace from 0 to Nyquist
			118 = Amplitude of complex trace from 0 to Nyquist
			119 = Phase of complex trace from 0 to Nyquist
			121 = Wavenumber time domain (k-t)
			122 = Wavenumber frequency (k-omega)
			123 = Envelope of the complex time trace
			124 = Phase of the complex time trace
			125 = Frequency of the complex time trace
			130 = Depth-Range (z-x) traces
			201 = Seismic data packed to bytes (by supack1)
			202 = Seismic data packed to 2 bytes (by supack2)
			   byte# 29-30
			*/

	short nvs;	/* Number of vertically summed traces yielding
			   this trace. (1 is one trace, 
			   2 is two summed traces, etc.)
			   byte# 31-32
			 */

	short nhs;	/* Number of horizontally summed traces yielding
			   this trace. (1 is one trace
			   2 is two summed traces, etc.)
			   byte# 33-34
			 */

	short duse;	/* Data use:
				1 = Production
				2 = Test
			   byte# 35-36
			 */

	int offset;	/* Distance from the center of the source point 
			   to the center of the receiver group 
			   (negative if opposite to direction in which 
			   the line was shot).
			   byte# 37-40
			 */

	int gelev;	/* Receiver group elevation from sea level
			   (all elevations above the Vertical datum are 
			   positive and below are negative).
			   byte# 41-44
			 */

	int selev;	/* Surface elevation at source.
			   byte# 45-48
			 */

	int sdepth;	/* Source depth below surface (a positive number).
			   byte# 49-52
			 */

	int gdel;	/* Datum elevation at receiver group.
			   byte# 53-56
			*/

	int sdel;	/* Datum elevation at source.
			   byte# 57-60
			*/

	int swdep;	/* Water depth at source.
			   byte# 61-64
			*/

	int gwdep;	/* Water depth at receiver group.
			   byte# 65-68
			*/

	short scalel;	/* Scalar to be applied to the previous 7 entries
			   to give the real value. 
			   Scalar = 1, +10, +100, +1000, +10000.
			   If positive, scalar is used as a multiplier,
			   if negative, scalar is used as a divisor.
			   byte# 69-70
			 */

	short scalco;	/* Scalar to be applied to the next 4 entries
			   to give the real value. 
			   Scalar = 1, +10, +100, +1000, +10000.
			   If positive, scalar is used as a multiplier,
			   if negative, scalar is used as a divisor.
			   byte# 71-72
			 */

	int  sx;	/* Source coordinate - X 
			   byte# 73-76
			*/

	int  sy;	/* Source coordinate - Y 
			   byte# 77-80
			*/

	int  gx;	/* Group coordinate - X 
			   byte# 81-84
			*/

	int  gy;	/* Group coordinate - Y 
			   byte# 85-88
			*/

	short counit;	/* Coordinate units: (for previous 4 entries and
				for the 7 entries before scalel)
			   1 = Length (meters or feet)
			   2 = Seconds of arc
			   3 = Decimal degrees
			   4 = Degrees, minutes, seconds (DMS)

			In case 2, the X values are longitude and 
			the Y values are latitude, a positive value designates
			the number of seconds east of Greenwich
				or north of the equator

			In case 4, to encode +-DDDMMSS
			counit = +-DDD*10^4 + MM*10^2 + SS,
			with scalco = 1. To encode +-DDDMMSS.ss
			counit = +-DDD*10^6 + MM*10^4 + SS*10^2 
			with scalco = -100.
			   byte# 89-90
			*/

	short wevel;	/* Weathering velocity. 
			   byte# 91-92
			*/

	short swevel;	/* Subweathering velocity. 
			   byte# 93-94
			*/

	short sut;	/* Uphole time at source in milliseconds. 
			   byte# 95-96
			*/

	short gut;	/* Uphole time at receiver group in milliseconds. 
			   byte# 97-98
			*/

	short sstat;	/* Source static correction in milliseconds. 
			   byte# 99-100
			*/

	short gstat;	/* Group static correction  in milliseconds.
			   byte# 101-102
			*/

	short tstat;	/* Total static applied  in milliseconds.
			   (Zero if no static has been applied.)
			   byte# 103-104
			*/

	short laga;	/* Lag time A, time in ms between end of 240-
			   byte trace identification header and time
			   break, positive if time break occurs after
			   end of header, time break is defined as
			   the initiation pulse which maybe recorded
			   on an auxiliary trace or as otherwise
			   specified by the recording system 
			   byte# 105-106
			*/

	short lagb;	/* lag time B, time in ms between the time break
			   and the initiation time of the energy source,
			   may be positive or negative 
			   byte# 107-108
			*/

	short delrt;	/* delay recording time, time in ms between
			   initiation time of energy source and time
			   when recording of data samples begins
			   (for deep water work if recording does not
			   start at zero time) 
			   byte# 109-110
			*/

	short muts;	/* mute time--start 
			   byte# 111-112
			*/

	short mute;	/* mute time--end 
			   byte# 113-114
			*/

	unsigned short ns;	/* number of samples in this trace 
			   byte# 115-116
			*/

	unsigned short dt;	/* sample interval; in micro-seconds
			   byte# 117-118
			*/

	short gain;	/* gain type of field instruments code:
				1 = fixed
				2 = binary
				3 = floating point
				4 ---- N = optional use 
			   byte# 119-120
			*/

	short igc;	/* instrument gain constant 
			   byte# 121-122
			*/

	short igi;	/* instrument early or initial gain 
			   byte# 123-124
			*/

	short corr;	/* correlated:
				1 = no
				2 = yes 
			   byte# 125-126
			*/

	short sfs;	/* sweep frequency at start 
			   byte# 127-128
			*/

	short sfe;	/* sweep frequency at end
			   byte# 129-130
			*/

	short slen;	/* sweep length in ms 
			   byte# 131-132
			*/

	short styp;	/* sweep type code:
				1 = linear
				2 = cos-squared
				3 = other
			   byte# 133-134
			*/

	short stas;	/* sweep trace length at start in ms
			   byte# 135-136
			*/

	short stae;	/* sweep trace length at end in ms 
			   byte# 137-138
			*/

	short tatyp;	/* taper type: 1=linear, 2=cos^2, 3=other 
			   byte# 139-140
			*/

	short afilf;	/* alias filter frequency if used 
			   byte# 141-142
			*/

	short afils;	/* alias filter slope
			   byte# 143-144
			*/

	short nofilf;	/* notch filter frequency if used
			   byte# 145-146
			*/

	short nofils;	/* notch filter slope
			   byte# 147-148
			*/

	short lcf;	/* low cut frequency if used
			   byte# 149-150
			*/

	short hcf;	/* high cut frequncy if used
			   byte# 151-152
			*/

	short lcs;	/* low cut slope
			   byte# 153-154
			*/

	short hcs;	/* high cut slope
			   byte# 155-156
			*/

	short year;	/* year data recorded
			   byte# 157-158
			*/

	short day;	/* day of year
			   byte# 159-160
			*/

	short hour;	/* hour of day (24 hour clock) 
			   byte# 161-162
			*/

	short minute;	/* minute of hour
			   byte# 163-164
			*/

	short sec;	/* second of minute
			   byte# 165-166
			*/

	short timbas;	/* time basis code:
				1 = local
				2 = GMT
				3 = other
			   byte# 167-168
			*/

	short trwf;	/* trace weighting factor, defined as 1/2^N
			   volts for the least sigificant bit
			   byte# 169-170
			*/

	short grnors;	/* geophone group number of roll switch
			   position one
			   byte# 171-172
			*/

	short grnofr;	/* geophone group number of trace one within
			   original field record
			   byte# 173-174
			*/

	short grnlof;	/* geophone group number of last trace within
			   original field record
			   byte# 175-176
			*/

	short gaps;	/* gap size (total number of groups dropped)
			   byte# 177-178
			*/

	short otrav;	/* overtravel taper code:
				1 = down (or behind)
				2 = up (or ahead)
			   byte# 179-180
			*/

#ifdef SLTSU_SEGY_H  /* begin Unocal SU segy.h differences */


	/* cwp local assignments */
	float d1;	/* sample spacing for non-seismic data
			   byte# 181-184
			*/

	float f1;	/* first sample location for non-seismic data
			   byte# 185-188
			*/

	float d2;	/* sample spacing between traces
			   byte# 189-192
			*/

	float f2;	/* first trace location
			   byte# 193-196
			*/

	float ungpow;	/* negative of power used for dynamic
			   range compression
			   byte# 197-200
			*/

	float unscale;	/* reciprocal of scaling factor to normalize
			   range
			   byte# 201-204
			*/

	short mark;	/* mark selected traces
			   byte# 205-206
			*/

	/* SLTSU local assignments */ 
	short mutb;	/* mute time at bottom (start time)
			   bottom mute ends at last sample
			   byte# 207-208
			*/
	float dz;	/* depth sampling interval in (m or ft)
			if =0.0, input are time samples
			   byte# 209-212
			*/

	float fz;	/* depth of first sample in (m or ft)
			   byte# 213-116
			*/

	short n2;	/* number of traces per cdp or per shot
			   byte# 217-218
			*/

        short shortpad; /* alignment padding
			   byte# 219-220
			*/

	int ntr; 	/* number of traces
			   byte# 221-224
			*/

	/* SLTSU local assignments end */ 

	short unass[8];	/* unassigned
			   byte# 225-240
			*/

#else

	/* cwp local assignments */
	float d1;	/* sample spacing for non-seismic data
			   byte# 181-184
			*/

	float f1;	/* first sample location for non-seismic data
			   byte# 185-188
			*/

	float d2;	/* sample spacing between traces
			   byte# 189-192
			*/

	float f2;	/* first trace location
			   byte# 193-196
			*/

	float ungpow;	/* negative of power used for dynamic
			   range compression
			   byte# 197-200
			*/

	float unscale;	/* reciprocal of scaling factor to normalize
			   range
			   byte# 201-204
			*/

	int ntr; 	/* number of traces
			   byte# 205-208
			*/

	short mark;	/* mark selected traces
			   byte# 209-210
			*/

        short shortpad; /* alignment padding
			   byte# 211-212
			*/


	short unass[14];	/* unassigned--NOTE: last entry causes 
			   a break in the word alignment, if we REALLY
			   want to maintain 240 bytes, the following
			   entry should be an odd number of short/UINT2
			   OR do the insertion above the "mark" keyword
			   entry
			   byte# 213-240
			*/
#endif

	float  data[SU_NFLTS];

} segy;


typedef struct {	/* bhed - binary header */

	int jobid;	/* job identification number */

	int lino;	/* line number (only one line per reel) */

	int reno;	/* reel number */

	short ntrpr;	/* number of data traces per record */

        short nart;	/* number of auxiliary traces per record */

	unsigned short hdt; /* sample interval in micro secs for this reel */

	unsigned short dto; /* same for original field recording */

	unsigned short hns; /* number of samples per trace for this reel */

	unsigned short nso; /* same for original field recording */

	short format;	/* data sample format code:
				1 = floating point, 4 byte (32 bits)
				2 = fixed point, 4 byte (32 bits)
				3 = fixed point, 2 byte (16 bits)
				4 = fixed point w/gain code, 4 byte (32 bits)
				5 = IEEE floating point, 4 byte (32 bits)
				8 = two's complement integer, 1 byte (8 bits)
			*/

	short fold;	/* CDP fold expected per CDP ensemble */

	short tsort;	/* trace sorting code: 
				1 = as recorded (no sorting)
				2 = CDP ensemble
				3 = single fold continuous profile
				4 = horizontally stacked */

	short vscode;	/* vertical sum code:
				1 = no sum
				2 = two sum ...
				N = N sum (N = 32,767) */

	short hsfs;	/* sweep frequency at start */

	short hsfe;	/* sweep frequency at end */

	short hslen;	/* sweep length (ms) */

	short hstyp;	/* sweep type code:
				1 = linear
				2 = parabolic
				3 = exponential
				4 = other */

	short schn;	/* trace number of sweep channel */

	short hstas;	/* sweep trace taper length at start if
			   tapered (the taper starts at zero time
			   and is effective for this length) */

	short hstae;	/* sweep trace taper length at end (the ending
			   taper starts at sweep length minus the taper
			   length at end) */

	short htatyp;	/* sweep trace taper type code:
				1 = linear
				2 = cos-squared
				3 = other */

	short hcorr;	/* correlated data traces code:
				1 = no
				2 = yes */

	short bgrcv;	/* binary gain recovered code:
				1 = yes
				2 = no */

	short rcvm;	/* amplitude recovery method code:
				1 = none
				2 = spherical divergence
				3 = AGC
				4 = other */

	short mfeet;	/* measurement system code:
				1 = meters
				2 = feet */

	short polyt;	/* impulse signal polarity code:
				1 = increase in pressure or upward
				    geophone case movement gives
				    negative number on tape
				2 = increase in pressure or upward
				    geophone case movement gives
				    positive number on tape */

	short vpol;	/* vibratory polarity code:
				code	seismic signal lags pilot by
				1	337.5 to  22.5 degrees
				2	 22.5 to  67.5 degrees
				3	 67.5 to 112.5 degrees
				4	112.5 to 157.5 degrees
				5	157.5 to 202.5 degrees
				6	202.5 to 247.5 degrees
				7	247.5 to 292.5 degrees
				8	293.5 to 337.5 degrees */

	short hunass[170];	/* unassigned */

} bhed;

/* DEFINES */
#define gettr(x)	fgettr(stdin, (x))
#define vgettr(x)	fvgettr(stdin, (x))
#define puttr(x)	fputtr(stdout, (x))
#define vputtr(x)	fvputtr(stdout, (x))
#define gettra(x, y)    fgettra(stdin, (x), (y))


/* TOTHER represents "other"					*/
#define		TOTHER		-1	
/* TUNK represents time traces of an unknown type		*/
#define		TUNK		0
/* TREAL represents real time traces 				*/
#define		TREAL		1
/* TDEAD represents dead time traces 				*/
#define		TDEAD		2
/* TDUMMY represents dummy time traces 				*/
#define		TDUMMY		3
/* TBREAK represents time break traces 				*/
#define		TBREAK		4
/* UPHOLE represents uphole traces 				*/
#define		UPHOLE		5
/* SWEEP represents sweep traces 				*/
#define		SWEEP		6
/* TIMING represents timing traces 				*/
#define		TIMING		7
/* WBREAK represents timing traces 				*/
#define		WBREAK		8
/* NFGUNSIG represents near field gun signature 		*/
#define		NFGUNSIG	9	
/* FFGUNSIG represents far field gun signature	 		*/
#define		FFGUNSIG	10
/* SPSENSOR represents seismic pressure sensor	 		*/
#define		SPSENSOR	11
/* TVERT represents multicomponent seismic sensor 
	- vertical component */
#define		TVERT		12
/* TXLIN represents multicomponent seismic sensor 
	- cross-line component */
#define		TXLIN		13
/* TINLIN represents multicomponent seismic sensor 
	- in-line component */
#define		TINLIN	14
/* ROTVERT represents rotated multicomponent seismic sensor 
	- vertical component */
#define		ROTVERT		15
/* TTRANS represents rotated multicomponent seismic sensor 
	- transverse component */
#define		TTRANS		16
/* TRADIAL represents rotated multicomponent seismic sensor 
	- radial component */
#define		TRADIAL		17
/* VRMASS represents vibrator reaction mass */
#define		VRMASS		18
/* VBASS represents vibrator baseplate */
#define		VBASS		19
/* VEGF represents vibrator estimated ground force */
#define		VEGF		20
/* VREF represents vibrator reference */
#define		VREF		21

/*** CWP trid assignments ***/
/* ACOR represents autocorrelation  */
#define		ACOR		109
/* FCMPLX represents fourier transformed - no packing 
   xr[0],xi[0], ..., xr[N-1],xi[N-1] */
#define		FCMPLX		110
/* FUNPACKNYQ represents fourier transformed - unpacked Nyquist
   xr[0],xi[0],...,xr[N/2],xi[N/2] */
#define		FUNPACKNYQ	111
/* FTPACK represents fourier transformed - packed Nyquist
   even N: xr[0],xr[N/2],xr[1],xi[1], ...,
	xr[N/2 -1],xi[N/2 -1]
   (note the exceptional second entry)
    odd N:
     xr[0],xr[(N-1)/2],xr[1],xi[1], ...,
     xr[(N-1)/2 -1],xi[(N-1)/2 -1],xi[(N-1)/2]
   (note the exceptional second & last entries)
*/
#define		FTPACK		112
/* TCMPLX represents complex time traces 			*/
#define		TCMPLX		113
/* FAMPH represents freq domain data in amplitude/phase form	*/
#define		FAMPH		114
/* TAMPH represents time domain data in amplitude/phase form	*/
#define		TAMPH		115
/* REALPART represents the real part of a trace to Nyquist	*/
#define		REALPART	116
/* IMAGPART represents the real part of a trace to Nyquist	*/
#define		IMAGPART	117
/* AMPLITUDE represents the amplitude of a trace to Nyquist	*/
#define		AMPLITUDE	118
/* PHASE represents the phase of a trace to Nyquist		*/
#define		PHASE		119
/* KT represents wavenumber-time domain data 			*/
#define		KT		121
/* KOMEGA represents wavenumber-frequency domain data		*/
#define		KOMEGA		122
/* ENVELOPE represents the envelope of the complex time trace	*/
#define		ENVELOPE	123
/* INSTPHASE represents the phase of the complex time trace	*/
#define		INSTPHASE	124
/* INSTFREQ represents the frequency of the complex time trace	*/
#define		INSTFREQ	125
/* DEPTH represents traces in depth-range (z-x)			*/
#define		TRID_DEPTH	130
/* 3C data...  v,h1,h2=(11,12,13)+32 so a bitmask will convert  */
/* between conventions */
/* CHARPACK represents byte packed seismic data from supack1	*/
#define		CHARPACK	201
/* SHORTPACK represents 2 byte packed seismic data from supack2	*/
#define		SHORTPACK	202


#define ISSEISMIC(id) (( (id)==TUNK || (id)==TREAL || (id)==TDEAD || (id)==TDUMMY || (id)==TBREAK || (id)==UPHOLE || (id)==SWEEP || (id)==TIMING || (id)==WBREAK || (id)==NFGUNSIG || (id)==FFGUNSIG || (id)==SPSENSOR || (id)==TVERT || (id)==TXLIN || (id)==TINLIN || (id)==ROTVERT || (id)==TTRANS || (id)==TRADIAL || (id)==ACOR ) ? cwp_true : cwp_false ) 

/* FUNCTION PROTOTYPES */
#ifdef __cplusplus /* if C++, specify external linkage to C functions */
extern "C" {
#endif

/* get trace and put trace */
int fgettr(FILE *fp, segy *tp);
int fvgettr(FILE *fp, segy *tp);
void fputtr(FILE *fp, segy *tp);
void fvputtr(FILE *fp, segy *tp);
int fgettra(FILE *fp, segy *tp, int itr);

/* get gather and put gather */
/*segy **fget_gather(FILE *fp, cwp_String *key,cwp_String *type,Value *n_val,
                        int *nt,int *ntr, float *dt,int *first);
segy **get_gather(cwp_String *key, cwp_String *type, Value *n_val,
			int *nt, int *ntr, float *dt, int *first);
segy **fput_gather(FILE *fp, segy **rec,int *nt, int *ntr);
segy **put_gather(segy **rec,int *nt, int *ntr);*/

/* hdrpkge */
/*void gethval(const segy *tp, int index, Value *valp);
void puthval(segy *tp, int index, Value *valp);
void getbhval(const bhed *bhp, int index, Value *valp);
void putbhval(bhed *bhp, int index, Value *valp);
void gethdval(const segy *tp, char *key, Value *valp);
void puthdval(segy *tp, char *key, Value *valp);
char *hdtype(const char *key);
char *getkey(const int index);
int getindex(const char *key);
void swaphval(segy *tp, int index);
void swapbhval(bhed *bhp, int index);
void printheader(const segy *tp);*/

void tabplot(segy *tp, int itmin, int itmax);

#ifdef __cplusplus /* if C++, end external linkage specification */
}
#endif

#endif