Commit b9ddcf9e authored by sp2668's avatar sp2668

correction tut5

parent 4dab58dd
No preview for this file type
......@@ -133,7 +133,7 @@ Assume that the company is maximising its net surplus for a given electricity pr
\end{enumerate}
%=============== ======================================================
\paragraph{Problem VI.2 \normalsize (Economic dispatch in a single bidding zone).}~\\
\paragraph{Problem IV.2 \normalsize (Economic dispatch in a single bidding zone).}~\\
%=====================================================================
Consider an electricity market with two generator types, one with the cost function $C_1(G_1)=c_1G_1$ with variable cost $c_1 = 20\emwh$, capacity $K_1 = 300\mw$ and a dispatch rate of $G_1$~[MW], and another with the cost function $C_2(G_2)=c_2G_2$ with variable cost $c_2=50\emwh$, capacity $K_2=400\mw$ and a dispatch rate of $G_2$~[MW]. The demand has utility function $U(D) = 8000D - 5D^2$~[\euro/h] for a consumption rate of $D$~[MW].
......@@ -158,8 +158,8 @@ Consider an electricity market with two generator types, one with the cost funct
Consider the two-bus power system shown in Figure \ref{test}, where the two nodes represent two markets, each with different total demand, and one generator at each node. At node A the demand is $D_A = 2000 \si{\mega\watt}$, whereas at node B the demand is $D_B = 1000 \si{\mega\watt}$. Furthermore, there is a transmission line with a capacity denoted by $F_{AB}$. The marginal cost of production of the generators connected to buses A and B are given respectively by the following expressions:
\begin{align*}
MC_A & = 20 + 0.03 G_A \hspace{1cm}\eur/\si{\mega\watt\hour} \\
MC_B & = 15 + 0.02 G_B \hspace{1cm} \eur/\si{\mega\watt\hour}
MC_A & = 20 + 0.02 G_A \hspace{1cm}\eur/\si{\mega\watt\hour} \\
MC_B & = 15 + 0.03 G_B \hspace{1cm} \eur/\si{\mega\watt\hour}
\end{align*}
Assume that the demands $D_A$ and $D_B$ are constant and insensitive to price, that energy is sold at its marginal cost of production and that there are no limits on the output of the generators.
......
......@@ -230,8 +230,8 @@ Consider an electricity market with two generator types, one with the cost funct
Consider the two-bus power system shown in Figure \ref{twobus}, where the two nodes represent two markets, each with different total demand, and one generator at each node. At node A the demand is $D_A = 2000 \si{\mega\watt}$, whereas at node B the demand is $D_B = 1000 \si{\mega\watt}$. Furthermore, there is a transmission line with a capacity denoted by $F_{AB}$. The marginal cost of production of the generators connected to buses A and B are given respectively by the following expressions:
\begin{align*}
MC_A & = 20 + 0.03 G_A \hspace{1cm}\eur/\si{\mega\watt\hour} \\
MC_B & = 15 + 0.02 G_B \hspace{1cm} \eur/\si{\mega\watt\hour}
MC_A & = 20 + 0.02 G_A \hspace{1cm}\eur/\si{\mega\watt\hour} \\
MC_B & = 15 + 0.03 G_B \hspace{1cm} \eur/\si{\mega\watt\hour}
\end{align*}
Assume that the demands $D_A$ and $D_B$ are constant and insensitive to price, that energy is sold at its marginal cost of production and that there are no limits on the output of the generators.
......
No preview for this file type
......@@ -101,7 +101,7 @@
%=====================================================================
Two generators are connected to the grid by a single transmission
line (with no electrical demand on their side of the transmission line). A single company owns both the generators and the transmission line. Generator 1 has a linear cost curve $C(g) = 5 g$ [\euro/h] and a capacity of 300~MW and Generator 2 has a linear cost curve $C(g) = 10 g$ [\euro/h] and a capacity of 900~MW. The transmission line has a capacity of 1000~MW. Suppose the demand in the grid is always high enough to absorb the
line (with no electrical demand on their side of the transmission line). A single company owns both the generators and the transmission line. Generator 1 has a linear cost curve $C_1(g_1) = 5 g_1$ [\euro/h] and a capacity of 300~MW and Generator 2 has a linear cost curve $C_2(g_2) = 10 g_2$ [\euro/h] and a capacity of 900~MW. The transmission line has a capacity $K$ of 1000~MW. Suppose the demand in the grid is always high enough to absorb the
generation from the two generators and that the market price of
electricity $\pi$ is never below 15 \euro/MWh and averages 20
\euro/MWh.
......
......@@ -118,7 +118,7 @@
%=====================================================================
Two generators are connected to the grid by a single transmission
line (with no electrical demand on their side of the transmission line). A single company owns both the generators and the transmission line. Generator 1 has a linear cost curve $C(g) = 5 g$ [\euro/h] and a capacity of 300~MW and Generator 2 has a linear cost curve $C(g) = 10 g$ [\euro/h] and a capacity of 900~MW. The transmission line has a capacity of 1000~MW. Suppose the demand in the grid is always high enough to absorb the
line (with no electrical demand on their side of the transmission line). A single company owns both the generators and the transmission line. Generator 1 has a linear cost curve $C_1(g_1) = 5 g_1$ [\euro/h] and a capacity of 300~MW and Generator 2 has a linear cost curve $C_2(g_2) = 10 g_2$ [\euro/h] and a capacity of 900~MW. The transmission line has a capacity $K$ of 1000~MW. Suppose the demand in the grid is always high enough to absorb the
generation from the two generators and that the market price of
electricity $\pi$ is never below 15 \euro/MWh and averages 20
\euro/MWh.
......@@ -159,12 +159,12 @@ electricity $\pi$ is never below 15 \euro/MWh and averages 20
From stationarity we have for $g_1$ the non-zero terms:
\begin{align*}
0 & = \frac{\d}{\d g_1} \left( \pi (g_1+g_2) - 5g_1 - 10g_2\right) - \bar{\m}_1 \frac{\d}{\d g_1} (g_1-\hat g_1)- \ubar{m}_1 \frac{\d}{\d g_1} (-g_1) -\m_T \frac{\d}{\d g_1} (g_1+g_2-K) \nn \\
0 & = \frac{\d}{\d g_1} \left( \pi (g_1+g_2) - 5g_1 - 10g_2\right) - \bar{\m}_1 \frac{\d}{\d g_1} (g_1-\hat g_1)- \ubar{\m}_1 \frac{\d}{\d g_1} (-g_1) -\m_T \frac{\d}{\d g_1} (g_1+g_2-K) \nn \\
& = \pi -5 - \bar{\m}_1 + \ubar{\m}_1 - \m_T
\end{align*}
For $g_2$ we have
\begin{align*}
0 & = \frac{\d}{\d g_2} \left( \pi (g_1+g_2) - 5g_1 - 10g_2\right) - \bar{\m}_2 \frac{\d}{\d g_2} (g_2-\hat g_2)- \ubar{m}_2 \frac{\d}{\d g_2} (-g_2) -\m_T \frac{\d}{\d g_2} (g_1+g_2-K) \nn \\
0 & = \frac{\d}{\d g_2} \left( \pi (g_1+g_2) - 5g_1 - 10g_2\right) - \bar{\m}_2 \frac{\d}{\d g_2} (g_2-\hat g_2)- \ubar{\m}_2 \frac{\d}{\d g_2} (-g_2) -\m_T \frac{\d}{\d g_2} (g_1+g_2-K) \nn \\
& = \pi - 10- \bar{\m}_2 + \ubar{\m}_2 - \m_T
\end{align*}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment